74LVC1G79GN,132
| Parameters | |
|---|---|
| Published | 2010 |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.3mm |
| Base Part Number | 74LVC1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 1 |
| Clock Frequency | 500MHz |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 1.7 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 500μA |
| Current - Output High, Low | 32mA 32mA |
| Max Propagation Delay @ V, Max CL | 3.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 200 MHz |
| Max Supply Voltage (DC) | 5.5V |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.35mm |
| Width | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
74LVC1G79GN,132 Overview
The package is in the form of 6-XFDFN. As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Non-Invertedas the output. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 1.65V~5.5Vis used as the supply voltage. Currently, the operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74LVC series. Its output frequency should not exceed 500MHz Hz. In total, there are 1 elements. There is 500μA quiescent consumption. Terminations are 6. You can search similar parts based on 74LVC1G79. The power supply voltage is 3.3V. There is 5pF input capacitance for this T flip flop. The electronic device belongs to the LVC/LCX/Zfamily. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 6. There is a clock edge trigger type of Positive Edgeon this device. An electronic part with 1bits has been designed. It consumes 100nA current.
74LVC1G79GN,132 Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
74LVC1G79GN,132 Applications
There are a lot of Nexperia USA Inc. 74LVC1G79GN,132 Flip Flops applications.
- Bounce elimination switch
- Modulo – n – counter
- Parallel data storage
- Pattern generators
- Registers
- Data transfer
- Differential Individual
- ATE
- Single Down Count-Control Line
- Shift registers
