74LVC1G79GS,132
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | D-Type |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 74LVC1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 1 |
| Clock Frequency | 500MHz |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 1.7 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 500μA |
| Current - Output High, Low | 32mA 32mA |
| Max Propagation Delay @ V, Max CL | 3.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 200 MHz |
| Max Supply Voltage (DC) | 5.5V |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.35mm |
| RoHS Status | ROHS3 Compliant |
74LVC1G79GS,132 Overview
It is embeded in 6-XFDFN case. It is included in the package Tape & Reel (TR). Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 1.65V~5.5Vis used as the supply voltage. It is operating at -40°C~125°C TA. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 74LVC series. There should be no greater frequency than 500MHzon its output. The list contains 1 elements. As a result, it consumes 500μA of quiescent current without being affected by external factors. Currently, there are 6 terminations. You can search similar parts based on 74LVC1G79. A voltage of 3.3V provides power to the D latch. Input capacitance of this device is 5pF farads. A device of this type belongs to the family of LVC/LCX/Z. It is mounted by the way of Surface Mount. It is designed with 6 pins. Its clock edge trigger type is Positive Edge. It is designed with 1bits. There is a consumption of 100nAof quiescent current from it.
74LVC1G79GS,132 Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
74LVC1G79GS,132 Applications
There are a lot of Nexperia USA Inc. 74LVC1G79GS,132 Flip Flops applications.
- Count Modes
- High Performance Logic for test systems
- Storage registers
- Set-reset capability
- Data transfer
- Dynamic threshold performance
- Buffered Clock
- Guaranteed simultaneous switching noise level
- Control circuits
- Asynchronous counter
