74LVC1G79GV,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Output Current | 50mA |
| Number of Bits | 1 |
| Clock Frequency | 500MHz |
| Propagation Delay | 2.2 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 1.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 500μA |
| Current - Output High, Low | 32mA 32mA |
| Max Propagation Delay @ V, Max CL | 3.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 200 MHz |
| Max Supply Voltage (DC) | 5.5V |
| Clock Edge Trigger Type | Positive Edge |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G79GV,125 Overview
It is embeded in SC-74A, SOT-753 case. D flip flop is included in the Tape & Reel (TR)package. As configured, the output uses Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. A 1.65V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~125°C TA. D-Typeis the type of this D latch. It is a type of FPGA belonging to the 74LVC series. It should not exceed 500MHzin its output frequency. It consumes 500μA of quiescent It has been determined that there have been 5 terminations. You can search similar parts based on 74LVC1G79. Power is supplied from a voltage of 3.3V volts. Its input capacitance is 5pFfarads. This D flip flop belongs to the family of LVC/LCX/Z. There is an electronic part that is mounted in the way of Surface Mount. The 5pins are designed into the board. The clock edge trigger type for this device is Positive Edge. It is designed with 1bits. The superior flexibility of this circuit is achieved by using 1 circuits. It offers maximum design flexibility with its output current of 50mA. This D latch consumes 100nA quiescent current at all.
74LVC1G79GV,125 Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
74LVC1G79GV,125 Applications
There are a lot of Nexperia USA Inc. 74LVC1G79GV,125 Flip Flops applications.
- Storage Registers
- Patented noise
- Common Clocks
- Supports Live Insertion
- Storage registers
- Safety Clamp
- Functionally equivalent to the MC10/100EL29
- Shift registers
- 2 – Bit synchronous counter
- Automotive
