74LVC1T45FW4-7
| Parameters | |
|---|---|
| Terminal Pitch | 0.35mm |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Quiescent Current | 3μA |
| Family | LVC/LCX/Z |
| Logic Function | Translator |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Control Type | COMMON CONTROL |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Height Seated (Max) | 0.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
74LVC1T45FW4-7 Overview
Embedded in the 6-XFDFN package, it is available for you to use.A package of Tape & Reel (TR) has been used.In its configuration, Tri-State, Non-Inverted is used as the output.There is a translator type of Voltage Level for this electrical device.The electronic part is mounted in a way that corresponds to Surface Mount.Bidirectional is the Channel type of this electrical device.There is -40°C~125°C TA operating temperature.Flexible 1 circuits enable it to achieve high performance.Usually, when a transmission line is terminated, there are 6 termination points used.Level translators is powered by a 3.3V supply.Level translators is equipped wLevel translatorsh 6 pin count.There are a number of devices in the 74LVC series.The board has 6 pins.The design of this electronic part is based on 1 bits.Voltages above 5.5V are supported.A voltage of 1.65V is the minimum supply voltage required for it to operate.In the VCCA supply rail, 1.65V~5.5V is configured.In the VCCB, the supply rail is set to 1.65V~5.5V.Level translators has been mounted wLevel translatorsh the method of Surface Mount.In Bus Driver/Transceivers, this part is included.Logic ICs it uses are of the BUS TRANSCEIVER type.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.Electronic devices like this belong to the family LVC/LCX/Z.The quiescent current consumed by it is 3μA because it is unaffected by external factors.A 3.3V power supply powers it.TAPE AND REEL is well suited to this device because of its reliability.
74LVC1T45FW4-7 Features
6-XFDFN package
1 circuits
6 pin count
74LVC series
6 pins
3.3V power supplies
74LVC1T45FW4-7 Applications
There are a lot of Diodes Incorporated 74LVC1T45FW4-7 voltage translators & level shifters applications.
- Controlled Baseline
- Industrial
- GPIO
- Motor Drives
- Routers (Telecom Switching Equipment)
- Available in Military (-55°C to 125°C)
- Driving indicator LEDs or buzzers
- Routers (routing equipment)
- Temperature Ranges (1)
- Monitors
