74LVC1T45GN,132
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC1T45 |
| Pin Count | 6 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 5.1 ns |
| Quiescent Current | 16μA |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Max Supply Voltage (DC) | 5.5V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.2V~5.5V |
| Height Seated (Max) | 0.35mm |
| Width | 0.9mm |
| RoHS Status | ROHS3 Compliant |
74LVC1T45GN,132 Overview
Level translators is embedded in the 6-XFDFN package.The package is in the form of Tape & Reel (TR).Level translators uses Tri-State, Non-Inverted as level translatorss output configuration.This electrical device has a translator type of Voltage Level.The electronic part is mounted using the Surface Mount method.The Channel type of this electrical device is Bidirectional.A temperature of -40°C~125°C TA is used for operation.A transmission line can be terminated with 6 terminations.A series of related parts can be determined from the base part number 74LVC1T45.In order to power the device, a voltage supply of 1.5V is required.A total of 6 pins are included.There are a number of devices in the 74LVC series.The 6 pins are designed into it.Electronic parts are designed with a number of bits of 1.Supports a voltage of 5.5V as its maximum supply voltage.With a minimum supply voltage of 1.2V, it operates.In the VCCA supply rail, 1.2V~5.5V is configured.A VCCB supply rail is configured as 1.2V~5.5V.With the Surface Mount method, it is mounted.Channels are set to 1.The logic IC it adopts is BUS TRANSCEIVER.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z.Level translators consumes 16μA quiescent current and is not affected by external factors.
74LVC1T45GN,132 Features
6-XFDFN package
6 pin count
74LVC series
6 pins
74LVC1T45GN,132 Applications
There are a lot of Nexperia USA Inc. 74LVC1T45GN,132 voltage translators & level shifters applications.
- Personal Electronics
- Data and Clock Transmission Over Backplane
- Routers (routing equipment)
- SDIO
- Debouncing a mechanical switch
- Monitors
- One Fabrication Site
- Wireless and Telecom Infrastructures
- Eliminate Slow or Noisy Input Signals
- Enterprise
