74LVC1T45Z6-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-563, SOT-666 |
| Number of Pins | 6 |
| Weight | 3.005049mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 3μA |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Control Type | COMMON CONTROL |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| RoHS Status | ROHS3 Compliant |
74LVC1T45Z6-7 Overview
A package called SOT-563, SOT-666 contains it.Tape & Reel (TR) is the way it is packaged.In this configuration, the output is set to Tri-State, Non-Inverted.Voltage Level is the translator type of this electrical device.Mounting this electronic component follows the Surface Mount method.Electrical device with type Bidirectional channel.During operation, the temperature is set to -40°C~125°C TA.To achieve its exceptional flexibility, it relies on 1 circuits.There are 6 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Level translators is powered by a 3.3V supply.The device has a pin count of 6.The device is part of the 74LVC series.The pin configuration of the device is 6.There are 1 bits in this electronic part.The maximum supply voltage is 5.5V.With a minimum supply voltage of 1.65V, it operates.VCCA is configured with a supply rail that starts at 1.65V~5.5V.In the VCCB, the supply rail is set to 1.65V~5.5V.This electronic part is mounted in the way of Surface Mount.This part is included in Bus Driver/Transceivers.The logic IC it adopts is BUS TRANSCEIVER.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.In terms of electronic devices, this one is in the LVC/LCX/Z family.In order for Level translators to operate, level translators needs a power supply of 3.3V.TAPE AND REEL is well suited to this device because of its reliability.
74LVC1T45Z6-7 Features
SOT-563, SOT-666 package
1 circuits
6 pin count
74LVC series
6 pins
3.3V power supplies
74LVC1T45Z6-7 Applications
There are a lot of Diodes Incorporated 74LVC1T45Z6-7 voltage translators & level shifters applications.
- One Fabrication Site
- Printers and Other Peripherals
- General purpose I/O level shifting
- Debouncing a Mechanical Switch
- UART
- Data and Clock Transmission Over Backplane
- Signaling Level Conversion for Clock or Data
- Personal Electronics
- Available in Military (–55°C/125°C) Temperature Range
- Industrial
