74LVC273BQ-Q100X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74LVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC273 |
| JESD-30 Code | R-PQCC-N20 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Clock Frequency | 230MHz |
| Propagation Delay | 8.2 ns |
| Quiescent Current | 10μA |
| Family | LVC/LCX/Z |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 4.5mm |
| Width | 2.5mm |
| RoHS Status | ROHS3 Compliant |
74LVC273BQ-Q100X Overview
It is packaged in the way of 20-VFQFN Exposed Pad. It is contained within the Tape & Reel (TR)package. T flip flop uses Non-Invertedas its output configuration. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 1.65V~3.6V is required for operation. The operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. There should be no greater frequency than 230MHzon its output. There are 1 elements in it. There have been 20 terminations. JK flip flop belongs to 74LVC273 family. A voltage of 3.3V is used to power it. This T flip flop has a capacitance of 5pF farads at the input. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. The electronic part is mounted in the way of Surface Mount. The clock edge trigger type for this device is Positive Edge. 3.6Vis the maximum supply voltage (Vsup). 10μAquiescent current consumed.
74LVC273BQ-Q100X Features
Tape & Reel (TR) package
74LVC series
74LVC273BQ-Q100X Applications
There are a lot of Nexperia USA Inc. 74LVC273BQ-Q100X Flip Flops applications.
- Balanced Propagation Delays
- Bus hold
- ESD protection
- Automotive
- Buffer registers
- Shift registers
- Count Modes
- Clock pulse
- Circuit Design
- Data storage
