74LVC273PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-TSSOP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74LVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 1.65V~3.6V |
| Frequency | 150MHz |
| Base Part Number | 74LVC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Number of Bits | 8 |
| Clock Frequency | 230MHz |
| Propagation Delay | 4.8 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 1.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 10 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC273PW,112 Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tube. The output it is configured with uses Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 1.65V~3.6Vvolt supply, it operates as follows. -40°C~125°C TAis the operating temperature. D-Typedescribes this flip flop. It belongs to the 74LVCseries of FPGAs. There should be no greater frequency than 230MHzon its output. D latch consists of 1 elements. As a result, it consumes 10μA quiescent current. You can search similar parts based on 74LVC273. A 5pFfarad input capacitance is provided by this T flip flop. A part of the electronic system is mounted in the way of Surface Mount. There are 20pins on it. Its clock edge trigger type is Positive Edge. The flip flop is designed with 8bits. Due to its superior flexibility, it uses 8 circuits. It operates with 8 output lines. Currently, there are 10 lines of input. Despite external influences, it consumes 100nAof quiescent current. High level output current is set to -24mA. 24mA is the low level output current. It is recommended that the operating temperature be lower than 125°C. Ideally, the operating temperature should be higher than -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 1.2VV. The maximum supply voltage supported by the flip flop is 3.6V. This frequency can be achieved at 150MHz.
74LVC273PW,112 Features
Tube package
74LVC series
20 pins
8 Bits
74LVC273PW,112 Applications
There are a lot of Nexperia USA Inc. 74LVC273PW,112 Flip Flops applications.
- Count Modes
- Event Detectors
- Convert a momentary switch to a toggle switch
- Modulo – n – counter
- Storage Registers
- Frequency Divider circuits
- Memory
- Data storage
- Single Up Count-Control Line
- ESD protection
