74LVC2G157DCURG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC2G157 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Circuit | 1 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 4 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 2 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 6 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC2G157DCURG4 Overview
Due to the fact that it is provided in the 8-VFSOP (0.091, 2.30mm Width), digital switch allows the board to be compacted.The package is in the form of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Multiplexer.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.A supply voltage of 1.65V~5.5V provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74LVC series multiplexers.This configuration includes 8 terminations as part of its basic functionality.To find signal switch's related components, a base part number of 74LVC2G157 may also be used.The multiplexer's system is supplied with a voltage of 1.8V.A component pin count of 8 can be found on this turn signal switch.As a result, GULL WING represents the end of the conductors.In this case, the supply type is Single.A configuration of 8 pins is used.The mount is in Surface Mount.I would like to refer to the logic switch as a member of the LV/LV-A/LVX/H family.As a result, signal multiplexer provides 2 bits.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.For mux switch's normal operation, power supply 3.3V is provided.For the turn signal switch's operation, there are 1 outputs.In this multiplexer, there is a total of 2 inputs.The switches package is packaged in accordance with TR.
74LVC2G157DCURG4 Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
74LVC2G157DCURG4 Applications
There are a lot of Texas Instruments 74LVC2G157DCURG4 Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- Electronically controlled engine system
- PCIe
- Memory chips
- Enabling block of memory depending on address in memory chips
- High-performance memory systems
- Small scale TV wall
- Data demultiplexing
- CPU memory location identification
- Used to connect a single source to multiple destinations
