74LVC2G157DCUTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC2G157 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Circuit | 1 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 4 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 2 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 6 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC2G157DCUTG4 Overview
Due to the fact that it is provided in the 8-VFSOP (0.091, 2.30mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC Multiplexer is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.The turn signal switch is designed for use with a 1.65V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74LVC series can be used in a wide range of applications.There is a design for terminating 8 as part of its basic configuration.The base part number is 74LVC2G157, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 1.8V is supplied.A component pin count of 8 can be found on this turn signal switch.As the end of conductors, it uses GULL WING.There is a supply type of Single employed as part of this supply.It is configured with 8 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is included into the family of LV/LV-A/LVX/H.There are 2 bits in signal multiplexer.It is advisable that the maximal supply voltage (Vsup) remains at 5.5V to avoid some unnecessary failures.Normally, 3.3V is powered by a battery.There are 1 outputs designed to operate the turn signal switch.It is provided with 2 inputs.The switches package is packaged in accordance with TR.
74LVC2G157DCUTG4 Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
74LVC2G157DCUTG4 Applications
There are a lot of Texas Instruments 74LVC2G157DCUTG4 Signal Switches / Multiplexers / Decoders applications.
- CNC machines
- Seven segment displays
- Steel plants
- Data communication
- Automatic health monitoring systems
- Automatic Monitoring systems
- Home automation system
- Image transmission
- Logic circuits
- Make half adder
