74LVC2G53DP,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 15Ohm |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC2G53 |
| Pin Count | 8 |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Power Dissipation | 250mW |
| Propagation Delay | 800 ps |
| Turn On Delay Time | 4.8 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 4.8 ns |
| On-State Resistance (Max) | 10Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 3.8ns, 3.8ns |
| Charge Injection | 7.5pC |
| Switch-on Time-Max | 7ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC2G53DP,125 Overview
This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. 8 terminations have been made so far. The electronic part provides high-quality output because it has 2 channels. If the voltage supply is 2.7V volts, the electrical component should be turned on and run. A total of 8 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPDT switching circuits. A 1 circuit is present in this switch device. Use 74LVC2G53 to search for variants of the digital switches. A 15Ohm internal resistance characterizes this multiplexer. The functions of 8 pins can be found in the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. An effective Single supply digital multiplexer. It is recommended to use 1.65V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 40μA. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. There are various bandwidths available for data transfer.
74LVC2G53DP,125 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 300MHz
74LVC2G53DP,125 Applications
There are a lot of Nexperia USA Inc. 74LVC2G53DP,125 Analog Switches & Multiplexers ICs applications.
- HDTV
- Remote Powered Equipment
- Remote wireless modules
- DVD-R
- T1/E1 Terminals
- Avionics test equipment
- Microprocessor Controlled Analog Systems
- ATM
- Residential Gateways, Home Gateway/Router
- Imaging
