74LVC2G53GF,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 15Ohm |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 74LVC2G53 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Supply Type | Single |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 3.8ns, 3.8ns |
| Charge Injection | 7.5pC |
| Switch-on Time-Max | 7ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC2G53GF,115 Overview
As the electronic part is packed in 8-XFDFN, international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Operation at a temperature around -40°C~125°C TA. 8 terminations have been made so far. By its 2 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 2.7V voltage supply. As part of the design of the 8 series, this electronic part has been incorporated into the system. A SPDT switching circuit is used to build these analog multiplexers. 1 circuits are used in this analogue multiplexer. Using the 74LVC2G53 search parameter, you can discover variants of the switch. Analog switches have 15Ohm internal resistance. For functions related to 8 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.65V. 40μA current would be enough for this multiplexer to operate. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts.
74LVC2G53GF,115 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 300MHz
74LVC2G53GF,115 Applications
There are a lot of Nexperia USA Inc. 74LVC2G53GF,115 Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- E1 Multiplexer
- SDH
- Precision test equipment
- PBXs
- Imaging
- Public switching systems
- Industrial and process control systems
- 65 V DACs
- Switching Systems
