74LVC2G53GM,125
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFQFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 10Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 250mW |
| Number of Inputs | 2 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 3.8ns, 3.8ns |
| Charge Injection | 7.5pC |
| Switch-on Time-Max | 7ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.5mm |
| RoHS Status | ROHS3 Compliant |
74LVC2G53GM,125 Overview
The electrical component comes in 8-XFQFN Exposed Pad packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. Totally, there are 8 terminations. A 2 channel electronic part produces high-quality output. With a 2.7V voltage supply, the electrical component should be turned on and run. As part of its design, the 8 series is equipped with this electronic component. SPDT switching circuits are used in these analog switch ics. The multiplexer consists of 1 circuits. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. To find out what the 8 pins do, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. It is recommended to use 1.65V as the lowest voltage for the electrical part. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. The electrical component supports 2 inputs.
74LVC2G53GM,125 Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 300MHz
74LVC2G53GM,125 Applications
There are a lot of Nexperia USA Inc. 74LVC2G53GM,125 Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Voice over IP/DSL – Integrated Access Devices, Smart
- HDTV
- Multiplexers
- SDH
- Isolation
- RGB switches
- Automatic test equipment
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Frame Relay Equipment
