74LVC2G53GT,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 15Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC2G53 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Power Dissipation | 250mW |
| Propagation Delay | 800 ps |
| Turn On Delay Time | 6.7 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 6.8 ns |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 3.8ns, 3.8ns |
| Charge Injection | 7.5pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC2G53GT,115 Overview
The electronic component is convenient to ship overseas because it is packed in a 8-XFDFN. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~125°C TA. Total terminations are 8. The electronic part delivers high-quality output through its 2 channels. Turning on and running the electrical part should be easy with a 2.7V voltage supply. It is injected into the electrical part body with 8 pins. These analog multiplexers are built based on SPDT switching circuits. A 1 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with 74LVC2G53. There is 15Ohm internal resistance in this digital multiplexer. To find out what the functions of 8 pins are, please refer to their datasheets. Users shouldn't supply more than 5.5V voltage to the switch device. Single supply type digital switch with a low cost. 1.65V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 40μA current. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. In 300MHz-bandwidths, data can be transferred.
74LVC2G53GT,115 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 300MHz
74LVC2G53GT,115 Applications
There are a lot of Nexperia USA Inc. 74LVC2G53GT,115 Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Fiber to the Home
- New designs requiring multiplexer functions
- DSLAMs
- Channelized and Unchannelized DS3 applications
- Relay replacements
- RGB switches
- Modems
- SDH
- Mechanical reed relay replacement
