74LVC2T45DC-Q100H
| Parameters | |
|---|---|
| Voltage - VCCB | 1.2V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC2T45 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 5.1 ns |
| Quiescent Current | 16μA |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
74LVC2T45DC-Q100H Overview
Embedded in the 8-VFSOP (0.091, 2.30mm Width) package, it is available for you to use.Tape & Reel (TR) is the packaging method.In its configuration, Tri-State, Non-Inverted is used as the output.There is a translator type of Voltage Level for this electrical device.Surface Mount is the method used for mounting this electronic part.This electrical device has channel type Bidirectional.The operating temperature is -40°C~125°C TA.1 circuits are used to provide this superior level of flexibility.0 terminations are used to end transmission lines.The base part number 74LVC2T45 can be used to find its related parts.This device is powered by a supply voltage of 1.5V which is applied to it.There are 8 pins on this device.This is a device from the Automotive, AEC-Q100, 74LVC series.In addition, it is designed with a pin number of 8.The design of this electronic part is based on 2 bits.5.5V is the maximum voltage it supports.A voltage of 1.2V is the minimum supply voltage required for it to operate.There is a configuration of 1.2V~5.5V for the VCCA supply rail.Level translators is configured from 1.2V~5.5V for the VCCB supply rail.The mount method is Surface Mount.There are a total of 2 channels.Level translators uses the logic IC BUS TRANSCEIVER.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.LVC/LCX/Z is the family name of this electronic device.Level translators consumes 16μA quiescent current and is not affected by external factors.
74LVC2T45DC-Q100H Features
8-VFSOP (0.091, 2.30mm Width) package
1 circuits
8 pin count
Automotive, AEC-Q100, 74LVC series
8 pins
74LVC2T45DC-Q100H Applications
There are a lot of Nexperia USA Inc. 74LVC2T45DC-Q100H voltage translators & level shifters applications.
- Controlled Baseline
- Eliminate slow or noisy input signals
- Temperature Ranges (1)
- SMBus
- Data and Clock Transmission Over Backplane
- Electronic Points of Sale
- General purpose I/O level shifting
- I2C / SMBus
- Extended Product Life Cycle
- Enterprise and communications
