74LVC2T45GM,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFQFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC2T45 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 5.1 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 48.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.2V~5.5V |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC2T45GM,125 Overview
Level translators is integrated into the 8-XFQFN Exposed Pad package.The package is in the form of Tape & Reel (TR).Level translators uses Tri-State, Non-Inverted as the output.Its translator type is Voltage Level.Electronic parts are mounted using the Surface Mount method.In this electrical device, the Channel type is Bidirectional.The temperature used for operation is -40°C~125°C TA.1 circuits are used to achieve its superior flexibility.As part of the transmission line termination process, there are a total of 8 terminations.There is a base part number 74LVC2T45 that refers to the related parts.There is a voltage supply of 1.5V which powers the device.A total of 8 pins are included.Level translators belongs to the series 74LVC.8 pins are used in its design.An electronic part with 2 bits is designed.Supports a voltage of 5.5V as its maximum supply voltage.With a minimum supply voltage of 1.2V, it operates.Level translators is configured from 1.2V~5.5V for the VCCA supply rail.There is a configuration of 1.2V~5.5V for the VCCB supply rail.With the Surface Mount method, it is mounted.2 channels are available.The logic IC it adopts is BUS TRANSCEIVER.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.Level translators is a member of the LVC/LCX/Z family of electronic devices.Without external influence, it consumes 8μA of quiescent current.
74LVC2T45GM,125 Features
8-XFQFN Exposed Pad package
1 circuits
8 pin count
74LVC series
8 pins
74LVC2T45GM,125 Applications
There are a lot of Nexperia USA Inc. 74LVC2T45GM,125 voltage translators & level shifters applications.
- Extended Product-Change Notification
- SMBus
- Temperature Ranges (1)
- Driving Indicator LEDs or Buzzers
- Extended Product Life Cycle
- Printers and Other Peripherals
- Monitors
- I2C / SMBus
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- One Assembly and Test Site
