74LVC373AD-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Operating Supply Current | 40μA |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 3.3 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74LVC373AD-Q100J Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. It is packaged in the way of Tape & Reel (TR). Tri-State is the output configured for it. D-Type Transparent Latch is the logic type of this electrical device. Surface Mount is used to mount this electronic part. With a supply voltage of 1.65V~3.6V, it operates. A temperature of -40°C~125°C is used for operation. There are a number of FPGAs in this series, including this one. An electronic part with 8 bits is designed. This device is designed with 20 terminations. 74LVC373 is its family. With the supply voltage set at 3.3V, it is able to operate. 20 pins are included. It is a member of the LVC/LCX/Z family of electronic devices. The device has 20 pins. Mounting this electronic component follows the Surface Mount method. This device has 2 ports on board, which are all available at the same time. During this period, the maximum supply voltage (Vsup) reaches 3.6V. There are electronic circuits attached to the 8 input lines. It consumes 40μA of quiescent current without being affected by outside factors.
74LVC373AD-Q100J Features
20-SOIC (0.295, 7.50mm Width) package
Automotive, AEC-Q100, 74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
74LVC373AD-Q100J Applications
There are a lot of Nexperia USA Inc. 74LVC373AD-Q100J Latches applications.
- Accumulator Registers
- A/D converters
- Hammer Device Information
- Communication systems
- Pattern generators
- Parallel data storage
- Flip-flops
- Double bus register system
- Multistage ripple counting
- A/D and D/A conversion
