banner_page

74LVC373ADB-Q100J

D-Type, Latch 1.65V~3.6V Tri-State Latches Automotive, AEC-Q100, 74LVC Series 74LVC373 20-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74LVC373ADB-Q100J
  • Package: 20-SSOP (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 411
  • Description: D-Type, Latch 1.65V~3.6V Tri-State Latches Automotive, AEC-Q100, 74LVC Series 74LVC373 20-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.209, 5.30mm Width)
Number of Pins 20
Supplier Device Package 20-SSOP
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series Automotive, AEC-Q100, 74LVC
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Voltage - Supply 1.65V~3.6V
Base Part Number 74LVC373
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Number of Channels 8
Number of Circuits 8
Max Supply Voltage 3.6V
Min Supply Voltage 1.65V
Operating Supply Current 40μA
Propagation Delay 6.5 ns
Quiescent Current 40μA
Turn On Delay Time 3.3 ns
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
High Level Output Current 24mA
Low Level Output Current 24mA
Number of Input Lines 8
Independent Circuits 1
Number of Output Lines 8
Delay Time - Propagation 3.3ns
RoHS Status RoHS Compliant

74LVC373ADB-Q100J Overview


It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. As a result, it has a packaging of Tape & Reel (TR). There is a Tri-State output configured. This electrical device has Logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. In order for it to operate, it needs a supply voltage of 1.65V~3.6V. The temperature at which the machine is operating is -40°C~125°C. An FPGA of this type belongs to the Automotive, AEC-Q100, 74LVC series. There is no doubt that it belongs to the family 74LVC373. In addition, it is designed with a pin number of 20. Electronic parts are mounted using the Surface Mount method. There are electronic circuits attached to the 8 input lines. Regardless of the input line, the binary equivalent of the input line will be generated by the 8 output lines. Without external influences, it consumes 40μA of quiescent current. The circuit's superior flexibility is achieved through the use of 8 circuits. 24mA is set as the low level output current. The high level output current is set to 24mA. Lower than 125°C is the ideal operating temperature. It is recommended that the operating temperature be higher than -40°C. There is a maximum voltage supply of 3.6V that can be applied to it. In order for the machine to operate, the supply voltage must be 1.65V.

74LVC373ADB-Q100J Features


20-SSOP (0.209, 5.30mm Width) package
Automotive, AEC-Q100, 74LVC series
74LVC373 family
20 pins

74LVC373ADB-Q100J Applications


There are a lot of Nexperia USA Inc. 74LVC373ADB-Q100J Latches applications.

  • Shift Registers
  • Storage
  • Shift left register
  • Parallel data storage
  • Programmable binary
  • Sample and hold register
  • Automatic test equipment
  • Frequency dividing
  • OC-48 communication systems
  • Shift right register

Write a review

Note: HTML is not translated!
    Bad           Good