74LVC374ABQ-Q100X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | QUAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Quiescent Current | 100nA |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Length | 4.5mm |
| Width | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LVC374ABQ-Q100X Overview
The flip flop is packaged in a case of 20-VFQFN Exposed Pad. The package Tape & Reel (TR)contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. A 1.65V~3.6Vsupply voltage is required for it to operate. It is at -40°C~125°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 74LVCseries of FPGAs. You should not exceed 150MHzin the output frequency of the device. A total of 1elements are contained within it. T flip flop consumes 10μA quiescent energy. Currently, there are 20 terminations. The 74LVC374 family contains this object. A voltage of 3.3V provides power to the D latch. The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Electronic devices of this type belong to the LVC/LCX/Zfamily. There is an electronic part mounted in the way of Surface Mount. This board is designed with 20pins on it. As soon as 3.6Vis reached, Vsup reaches its maximum value. The flip flop contains 2ports. It consumes 100nA of quiescent current without being affected by external factors.
74LVC374ABQ-Q100X Features
Tape & Reel (TR) package
74LVC series
20 pins
74LVC374ABQ-Q100X Applications
There are a lot of Nexperia USA Inc. 74LVC374ABQ-Q100X Flip Flops applications.
- Bounce elimination switch
- Latch-up performance
- Count Modes
- ATE
- Circuit Design
- Data transfer
- Pattern generators
- Supports Live Insertion
- Frequency Dividers
- Event Detectors
