74LVC374ADB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 11 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC374ADB,118 Overview
In the form of 20-SSOP (0.209, 5.30mm Width), it has been packaged. It is included in the package Tape & Reel (TR). In the configuration, Tri-State, Non-Invertedis used as the output. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V volts, it operates. In this case, the operating temperature is -40°C~125°C TA. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 150MHz. A total of 1elements are present in it. It consumes 10μA of quiescent current without being affected by external factors. There have been 20 terminations. You can search similar parts based on 74LVC374. Power is supplied from a voltage of 2.7V volts. The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. LVC/LCX/Zis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. The clock edge trigger type for this device is Positive Edge. There are 8bits in its design. It reaches the maximum supply voltage (Vsup) at 3.6V. The D flip flop is embedded with 2ports. A total of 8input lines have been provided. This D latch consumes 100nA quiescent current at all.
74LVC374ADB,118 Features
Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
74LVC374ADB,118 Applications
There are a lot of Nexperia USA Inc. 74LVC374ADB,118 Flip Flops applications.
- Data transfer
- Circuit Design
- Dynamic threshold performance
- Digital electronics systems
- Differential Individual
- Count Modes
- Frequency Divider circuits
- Automotive
- Shift registers
- Single Down Count-Control Line
