74LVC377PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 1.2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Circuits | 8 |
| Number of Bits | 8 |
| Clock Frequency | 330MHz |
| Propagation Delay | 9.5 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 7.6ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 10 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC377PW,118 Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. There is an embedded version in the package Tape & Reel (TR). There is a Non-Invertedoutput configured with it. This trigger is configured to use Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 1.2V~3.6V volts, it operates. In this case, the operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74LVCseries of FPGAs. It should not exceed 330MHzin terms of its output frequency. In total, it contains 1 elements. As a result, it consumes 10μA quiescent current. Terminations are 20. The 74LVC377family includes it. The power supply voltage is 2.7V. A 5pFfarad input capacitance is provided by this T flip flop. It is a member of the LVC/LCX/Zfamily of D flip flop. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. In this device, the clock edge trigger type is Positive Edge. It is designed with 8bits. There is a 3.6Vmaximum supply voltage (Vsup). Using 8 circuits, it is highly flexible. Currently, there are 10 input lines present. There is a consumption of 100nAof quiescent current from it. There is also a characteristic of WITH HOLD MODE.
74LVC377PW,118 Features
Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
74LVC377PW,118 Applications
There are a lot of Nexperia USA Inc. 74LVC377PW,118 Flip Flops applications.
- Computers
- Memory
- Parallel data storage
- 2 – Bit synchronous counter
- ESD protection
- Individual Asynchronous Resets
- Event Detectors
- Shift Registers
- Set-reset capability
- Synchronous counter
