74LVC4066D-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 15Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC4066 |
| Pin Count | 14 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Throw Configuration | SPST |
| Supply Type | Single |
| -3db Bandwidth | 500MHz |
| On-State Resistance (Max) | 10Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 42 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 3.9ns, 5ns |
| Charge Injection | 7.5pC |
| Crosstalk | -56dB @ 1MHz |
| Switch-on Time-Max | 12.5ns |
| Switch-off Time-Max | 11.5ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
74LVC4066D-Q100J Overview
Packed in 14-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. Total terminations are 14. A 1 channel electronic part produces high-quality output. If the voltage supply is 3.3V volts, the electrical component should be turned on and run. The electrical component body receives 14 pins. SPST - NO switching circuits are used in these analog switch ics. There are 4 circuits in this switch device. Use 74LVC4066 to search for variants of the digital switches. In this multiplexer, the internal resistance is 15Ohm. A voltage higher than 5.5V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 1.65V. For this digital switch to work, 40μA current would suffice. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. From the Automotive, AEC-Q100 series.
74LVC4066D-Q100J Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 500MHz
74LVC4066D-Q100J Applications
There are a lot of Nexperia USA Inc. 74LVC4066D-Q100J Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- PBX interfaces
- Cable PC
- Sample-and-hold systems
- Data switching
- Sample hold systems
- SONET
- DSLAMs
- Mechanical reed relay replacement
- E1 Multiplexer
