74LVC4066PW-Q100J
| Parameters | |
|---|---|
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Number of Inputs | 4 |
| Supply Type | Single |
| -3db Bandwidth | 500MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 42 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 3.9ns, 5ns |
| Charge Injection | 7.5pC |
| Crosstalk | -56dB @ 1MHz |
| Switch-on Time-Max | 12.5ns |
| Switch-off Time-Max | 11.5ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 15Ohm |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC4066 |
| Pin Count | 14 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
74LVC4066PW-Q100J Overview
Shipping overseas is convenient due to the electrical component's packing in 14-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~125°C TA. Totally, there are 14 terminations. This electronic part offers high-quality output due to its 1 channels. It is safe to turn on and run the electronic component with a 3.3V voltage supply. An injection of 14 pins is performed into the body of the electrical component. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching for the analog switch ic with 74LVC4066 if you are looking for variants. A 15Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 14 pins are available. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The analog switch ic is of the Single supply type and is cost-effective. 1.65V is the lowest voltage the electrical component should receive. This multiplexer would work with 40μA current. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. The 4 inputs need to be operated in order to work. It belongs to the series Automotive, AEC-Q100.
74LVC4066PW-Q100J Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 500MHz
74LVC4066PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74LVC4066PW-Q100J Analog Switches & Multiplexers ICs applications.
- Audio signal routing
- DVD-R
- Communications systems
- Digital Cross-Connects
- Transmit
- Audio/video switches
- Sample-and-hold systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Channel Banks
- DSUs
