74LVC4066PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 15Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC4066 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Power Dissipation | 500mW |
| Throw Configuration | SPST |
| Turn On Delay Time | 5.3 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 4.2 ns |
| -3db Bandwidth | 500MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 42 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 3.9ns, 5ns |
| Charge Injection | 7.5pC |
| Crosstalk | -56dB @ 1MHz |
| Switch-on Time-Max | 6.5ns |
| Switch-off Time-Max | 8.5ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC4066PW,118 Overview
As the electronic part is packed in 14-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~125°C TA. The total number of terminations is 14. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 2.7V volts, the electrical component should be turned on and run. A key feature of the 14 series is the inclusion of this electronic part as part of its design. A SPST - NO switching circuit is used to build these analog multiplexers. Try searching for the analog switch ic with 74LVC4066 if you are looking for variants. A 15Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 14 pins are available. Multiplexers should not be powered above 5.5V in normal situations. Digital switch that provides Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 1.65V. For this multiplexer to operate, 40μA current would be sufficient. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. There is a voltage range of 5V operating voltages for the electrical part. The electrical component supports 4 inputs.
74LVC4066PW,118 Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 500MHz
74LVC4066PW,118 Applications
There are a lot of Nexperia USA Inc. 74LVC4066PW,118 Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Sample hold systems
- 65 V DACs
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- E1 Multiplexer
- Public switching systems
- Avionics test equipment
- Industrial and process control systems
- DVD-R
- Imaging
