74LVC74AD-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Clock Frequency | 250MHz |
| Propagation Delay | 12.4 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC74AD-Q100J Overview
The flip flop is packaged in a case of 14-SOIC (0.154, 3.90mm Width). You can find it in the Tape & Reel (TR)package. It is configured with Differentialas an output. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A 1.2V~3.6Vsupply voltage is required for it to operate. Temperature is set to -40°C~125°C TA. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74LVC series. This D flip flop should not have a frequency greater than 250MHz. D latch consists of 2 elements. As a result, it consumes 10μA quiescent current. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74LVC74 family contains it. The D flip flop is powered by a voltage of 3.3V . Its input capacitance is 4pFfarads. Devices in the LVC/LCX/Zfamily are electronic devices. Electronic part Surface Mountis mounted in the way. This board is designed with 14pins on it. This device's clock edge trigger type is Positive Edge. 3.6Vis the maximum supply voltage (Vsup).
74LVC74AD-Q100J Features
Tape & Reel (TR) package
74LVC series
14 pins
74LVC74AD-Q100J Applications
There are a lot of Nexperia USA Inc. 74LVC74AD-Q100J Flip Flops applications.
- Matched Rise and Fall
- Bus hold
- Supports Live Insertion
- ATE
- Buffer registers
- Single Down Count-Control Line
- Instrumentation
- Count Modes
- Computing
- Pattern generators
