74LVC823ABQ,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Clock Frequency | 200MHz |
| Propagation Delay | 11.5 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 3.7 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 10ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5.5mm |
| Width | 3.5mm |
| RoHS Status | ROHS3 Compliant |
74LVC823ABQ,118 Overview
The package is in the form of 24-VFQFN Exposed Pad. It is included in the package Tape & Reel (TR). As configured, the output uses Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V volts, it operates. Currently, the operating temperature is -40°C~125°C TA. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 74LVCseries of FPGAs. A frequency of 200MHzshould not be exceeded by its output. The element count is 1 . There is a consumption of 10μAof quiescent energy. A total of 24terminations have been recorded. This D latch belongs to the family of 74LVC823. The power source is powered by 2.7V. This T flip flop has a capacitance of 5pF farads at the input. A device of this type belongs to the family of LVC/LCX/Z. In this case, the electronic component is mounted in the way of Surface Mount. There are 24pins on it. This device has the clock edge trigger type of Positive Edge. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. The D flip flop has no ports embedded. This D latch consumes 100μA quiescent current at all.
74LVC823ABQ,118 Features
Tape & Reel (TR) package
74LVC series
24 pins
74LVC823ABQ,118 Applications
There are a lot of Nexperia USA Inc. 74LVC823ABQ,118 Flip Flops applications.
- Event Detectors
- Differential Individual
- Bounce elimination switch
- Computing
- Load Control
- Consumer
- Registers
- Clock pulse
- Matched Rise and Fall
- QML qualified product
