74LVC8T245PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC8T245 |
| Pin Count | 24 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.2 ns |
| Quiescent Current | 30μA |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.2V~5.5V |
| Channels per Circuit | 8 |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74LVC8T245PW-Q100J Overview
Level translators is integrated into the 24-TSSOP (0.173, 4.40mm Width) package.Level translators is packaged in the way of Tape & Reel (TR).Level translators uses Tri-State, Non-Inverted as the output.There is a translator type of Voltage Level for this electrical device.The electronic part is mounted using the Surface Mount method.Level translators has the Channel type Bidirectional.A temperature of -40°C~125°C TA is used for operation.The superior flexibility of the system is achieved through its use of 1 circuits.Ending a transmission line involves 24 terminations.There is a base part number 74LVC8T245 that refers to the related parts.There is a voltage supply of 1.5V which powers the device.A total of 24 pins are included.The device is a member of the Automotive, AEC-Q100, 74LVC series.The pin configuration of the device is 24.There are 8 bits in this electronic part.Supports a voltage of 5.5V as its maximum supply voltage.A minimal voltage of 1.2V is needed to operate it.A VCCA supply rail is configured as 1.2V~5.5V.From 1.2V~5.5V, the supply rail of the VCCB is configured.Mounting this electronic component is done using the Surface Mount method.In this case, the logic IC is BUS TRANSCEIVER.The 2 terminations involve matching the characteristic impedance of a transmission line to the device that ends the line.This electronic device is categorized as a LVC/LCX/Z electronic device.Level translators consumes 30μA of quiescent current wLevel translatorshout being affected by external factors.
74LVC8T245PW-Q100J Features
24-TSSOP (0.173, 4.40mm Width) package
1 circuits
24 pin count
Automotive, AEC-Q100, 74LVC series
24 pins
74LVC8T245PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74LVC8T245PW-Q100J voltage translators & level shifters applications.
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- GPIO
- General purpose I/O level shifting
- Debouncing a mechanical switch
- Signaling Level Conversion for Clock or Data
- Routers (Telecom Switching Equipment)
- Industrial Equipment
- Available in Military (-55°C to 125°C)
- Eliminate Slow or Noisy Input Signals
- Routers (routing equipment)
