74LVC8T245PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC8T245 |
| Pin Count | 24 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 43 ns |
| Quiescent Current | 30μA |
| Turn On Delay Time | 43 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.2V~5.5V |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC8T245PW,118 Overview
Package 24-TSSOP (0.173, 4.40mm Width) includes it.The package is in the form of Tape & Reel (TR).In this configuration, the output is set to Tri-State, Non-Inverted.Translator type Voltage Level is associated with this electrical device.A Surface Mount mounting method has been used for this electronic part.This electrical device has channel type Bidirectional.-40°C~125°C TA is the operating temperature.1 circuits are used to achieve its superior flexibility.There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.A series of related parts can be determined from the base part number 74LVC8T245.In order to power the device, a voltage supply of 1.5V is required.The device has a pin count of 24.In terms of its design, it is a member of the 74LVC series.The board has 24 pins.This electronic part is designed with 8 Bits.5.5V is the maximum supply voltage it can handle.1.2V is its minimum supply voltage.VCCA is configured with a supply rail that starts at 1.2V~5.5V.Level translators is configured from 1.2V~5.5V for the VCCB supply rail.Using the method of Surface Mount, this electronic component is mounted.8 channels are available.There is a logic IC BUS TRANSCEIVER used in the system.There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.In terms of electronic devices, this one is in the LVC/LCX/Z family.Level translators consumes 30μA of quiescent current wLevel translatorshout being affected by outside factors.
74LVC8T245PW,118 Features
24-TSSOP (0.173, 4.40mm Width) package
1 circuits
24 pin count
74LVC series
24 pins
74LVC8T245PW,118 Applications
There are a lot of Nexperia USA Inc. 74LVC8T245PW,118 voltage translators & level shifters applications.
- Eliminate Slow or Noisy Input Signals
- Tablet PCs
- I2C
- Debouncing a Mechanical Switch
- Extended Product Life Cycle
- SDIO
- Tablet
- Enterprise
- UART
- Routers (routing equipment)
