74LVCE1G125SE-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCE |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.95V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Ports | 2 |
| Max Supply Current | 10μA |
| Number of Bits | 1 |
| Propagation Delay | 3.6 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 10.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 32mA 32mA |
| Logic Type | Buffer, Non-Inverting |
| Max I(ol) | 0.024 A |
| Number of Gates | 1 |
| Control Type | ENABLE LOW |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVCE1G125SE-7 Overview
Logical driver uses a neat 5-TSSOP, SC-70-5, SOT-353 package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.4V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 32mA 32mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74LVCE series devices. 5 terminations with different functions. Buffer IC reuqires a supply voltage of 1.95V. This logical driver is a member of the LVC/LCX/Z family. 5 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 5 pins. Enhanced with 2 ports. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. It is recommended to use a 3.3V power supply. It is generally sold in TAPE AND REEL package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 1 bits are included within the electrical component. It is sufficient to make 1 outputs. Working with 1 logic gates. Current beyond 10μA may cause faulty function and even damage to the electrical component.
74LVCE1G125SE-7 Features
Bus Driver/Transceivers
1 Logic Gates
74LVCE1G125SE-7 Applications
There are a lot of Diodes Incorporated 74LVCE1G125SE-7 Buffers & Transceivers applications.
- Sensor reporting
- Cell phones
- transmission relay
- Wired telephone
- Wireless interactive experience
- IPTV front end
- Digital systems
- Single to Multimode Fiber Conversion
- Wireless network systems
- Transmission stations
