Parameters |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
SSOP |
Number of Pins |
48 |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
48 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Polarity |
Non-Inverting |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
2.7V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
16 |
Propagation Delay |
7.7 ns |
Turn On Delay Time |
2.1 ns |
Family |
LVC/LCX/Z |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Logic IC Type |
BUS DRIVER |
Prop. Delay@Nom-Sup |
5.3 ns |
High Level Output Current |
12mA |
Low Level Output Current |
12mA |
Independent Circuits |
2 |
Length |
15.9mm |
Width |
7.5mm |
Thickness |
2.3mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74LVCH162373APVG8 Overview
In the SSOP package, it can be found as an embedded module. Tape & Reel (TR) is the packaging method. This electronic part is designed with 16 Bits. In this device, there are 48 terminations. The device is operated when the supply voltage is set to 3.3V. There are 48 pins attached to it. In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z. The pin configuration of the device is 48. A Surface Mount mounting method has been used for this electronic part. This device is equipped with 2 ports. The part is in the FF/Latches subcategory. The device's reliable performance makes it a good choice for TAPE AND REEL. A high efficiency supply voltage should be maintained at 3.3V. 12mA is set as the low level output current. In the high level output current, the value is set to 12mA. A temperature below 85°C should be used for operation. Temperatures higher than -40°C should be used for operation. There is a maximum voltage of 3.6V supported. The minimal voltage for operation is 2.7V. A logic IC that is used in this application is BUS DRIVER.
74LVCH162373APVG8 Features
SSOP package
16 Bits
48 pin count
48 pins
74LVCH162373APVG8 Applications
There are a lot of Integrated Device Technology (IDT) 74LVCH162373APVG8 Latches applications.
- A/D converters
- Ring counter
- Address register
- Frequency dividing
- Up-Down Johnson
- General-Purpose Register
- Audio and video switching
- Flip-flops
- Shift right register
- Shift left with parallel loading