74LVCH16373APAG8
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Packaging | Tape & Reel |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.3 ns |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 2 |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVCH16373APAG8 Overview
The package in which it is embedded is named TSSOP. A package of Tape & Reel has been used. The design of this electronic part is based on 16 bits. In this device, there are 48 terminations that have been designed. The device is operated when the supply voltage is set to 3.3V. It has 48 pins that makes it easy to use. It is a member of the LVC/LCX/Z family of electronic devices. In addition, it is designed with a pin number of 48. Mounting this electronic component follows the Surface Mount method. This device has 2 ports. The reliability of this device makes it well suited to TAPE AND REEL. A high level of efficiency is achieved by maintaining the supply voltage at 3.3V. 24mA is set as the low level output current. There is 24mA high level output current set. A temperature below 85°C should be used for operation. A temperature greater than -40°C should be used as the operating temperature. 3.6V is the maximum voltage it supports. In order for the machine to operate, the supply voltage must be 2.7V. There is a logic IC BUS DRIVER used in the system.
74LVCH16373APAG8 Features
TSSOP package
16 Bits
48 pin count
48 pins
74LVCH16373APAG8 Applications
There are a lot of Integrated Device Technology (IDT) 74LVCH16373APAG8 Latches applications.
- Avionics
- Relay replacement
- Synchronous frequency dividers
- Data acquisition
- Automotive Infotainment
- Clocks
- Shift left with parallel loading
- Counter control
- Four-bit storage with output enable
- Parallel data storage
