74LVCH16374ADL,118
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVCH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 300MHz |
| Propagation Delay | 3.8 ns |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 5.4ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74LVCH16374ADL,118 Overview
The item is packaged in 48-BSSOP (0.295, 7.50mm Width)cases. As part of the package Tape & Reel (TR), it is embedded. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis occupied by this electronic component. The supply voltage is set to 1.65V~3.6V. Temperature is set to -40°C~125°C TA. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74LVCHseries FPGA. Its output frequency should not exceed 300MHz Hz. In total, it contains 2 elements. As a result, it consumes 20μA quiescent current. 48terminations have occurred. This D latch belongs to the family of 74LVCH16374. It is powered by a voltage of 2.7V . Input capacitance of this device is 5pF farads. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. There is an electronic component mounted in the way of Surface Mount. This board has 48 pins. Its clock edge trigger type is Positive Edge. It is designed with a number of bits of 16. 3.6Vis the maximum supply voltage (Vsup). There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It operates with 8 output lines.
74LVCH16374ADL,118 Features
Tape & Reel (TR) package
74LVCH series
48 pins
16 Bits
74LVCH16374ADL,118 Applications
There are a lot of Nexperia USA Inc. 74LVCH16374ADL,118 Flip Flops applications.
- Synchronous counter
- Buffered Clock
- Data Synchronizers
- Single Up Count-Control Line
- Counters
- Functionally equivalent to the MC10/100EL29
- Instrumentation
- Common Clocks
- Latch-up performance
- Convert a momentary switch to a toggle switch
