74LVCH16374ADLRG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Temperature Grade | AUTOMOTIVE |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 4.9 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 4.5 ns |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.49mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVCH16374ADLRG4 Overview
In the form of SSOP, it has been packaged. It is included in the package Tape & Reel (TR). 48terminations have occurred. The D flip flop is powered by a voltage of 1.8V . Devices in the LVC/LCX/Zfamily are electronic devices. The electronic part is mounted in the way of Surface Mount. It is designed with 48 pins. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. 16bits are used in its design. The superior flexibility of this product is achieved by using 2 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. A D flip flop with 2embedded ports is available. In order for the chip to function, it has 3output lines. This input has 8lines in it. Quiescent current is consumed by the D latch in the amount of 20μA. A -24mAvalue is set for the high level output current. Low level output current is set to 24mA. A temperature below 125°Cshould be used for operation. Operating temperatures should be above -40°C. The system operates with a minimum supply voltage of 1.65V. 3.6Vis its maximum supply voltage. It is possible to obtain a frequency of 150MHz. It uses BUS DRIVERas its logic IC. There are 2 functions available on the JK flip flop. The D latch is equipped with 48 pins. In addition to its maximum design flexibility, the output current of the flip flop is 24mA.
74LVCH16374ADLRG4 Features
Tape & Reel (TR) package
48 pins
16 Bits
2 Functions
48 pin count
74LVCH16374ADLRG4 Applications
There are a lot of Texas Instruments 74LVCH16374ADLRG4 Flip Flops applications.
- CMOS Process
- Shift registers
- Asynchronous counter
- Automotive
- Frequency Divider circuits
- Consumer
- 2 – Bit synchronous counter
- ESCC
- EMI reduction circuitry
- Safety Clamp
