74LVCH244AD-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Supplier Device Package | 20-SO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVCH |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 1.2V~3.6V |
| Base Part Number | 74LVCH244 |
| Output Type | 3-State |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Quiescent Current | 40μA |
| Logic Function | Buffer |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 4 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LVCH244AD-Q100J Overview
Logical driver uses a neat 20-SOIC (0.295, 7.50mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 1.2V~3.6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the Automotive, AEC-Q100, 74LVCH series devices. Buffer IC is suitable for Surface Mount applications. The bus transceiver employs 4 bits for each element. You can search "74LVCH244" for other related electrical components. In quiescent state, the electronic part uses 40μA. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 24mA to its low level. In high level output mode, the electronic parts may conduct -24mA of current. Voltage used to run voltage buffer should be 1.2V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. Supplier device package of this electronic part would be 20-SO.
74LVCH244AD-Q100J Features
High Level Output: 24mA
Low Level Output: -24mA
74LVCH244AD-Q100J Applications
There are a lot of Nexperia USA Inc. 74LVCH244AD-Q100J Buffers & Transceivers applications.
- Precision engineering measurement
- Cable network front end
- 1x/2x Fiber Channel
- Tuner
- Metro access rings
- WDM transmission
- Wired telephone
- Wireless projection application for conferences and business talks
- Military satellite communications
- Low power, low voltage systems
