Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-XFDFN |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Series |
74LVCH |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Max Power Dissipation |
250mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.5V |
Terminal Pitch |
0.35mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74LVCH2T45 |
Pin Count |
8 |
Output Type |
Tri-State, Non-Inverted |
Polarity |
Non-Inverting |
Number of Channels |
2 |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.2V |
Number of Ports |
2 |
Number of Bits |
2 |
Propagation Delay |
5.1 ns |
Quiescent Current |
8μA |
Family |
LVC/LCX/Z |
Logic Function |
Transceiver, Translator |
Data Rate |
420Mbps |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS TRANSCEIVER |
High Level Output Current |
-32mA |
Channel Type |
Bidirectional |
Low Level Output Current |
32mA |
Translator Type |
Voltage Level |
Voltage - VCCA |
1.2V~5.5V |
Voltage - VCCB |
1.2V~5.5V |
Height Seated (Max) |
0.5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74LVCH2T45GF,115 Overview
In the 8-XFDFN package, it is embedded.A Tape & Reel (TR) package is used to package it.Tri-State, Non-Inverted is used for the output it is configured with.There is Voltage Level translator type for this electrical device.The electronic part is mounted using the Surface Mount method.In this electrical device, the Channel type is Bidirectional.A temperature of -40°C~125°C TA is used for operation.To achieve its exceptional flexibility, it relies on 1 circuits.There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.A series of related parts can be determined from the base part number 74LVCH2T45.This device is powered by a supply voltage of 1.5V which is applied to it.Pin count is 8.There are a number of devices in the series 74LVCH that belong to it.8 pins are used in its design.An electronic part with 2 bits is designed.Level translators supports the maximal supply voltage of 5.5V.A voltage of 1.2V is the minimum supply voltage required for it to operate.A VCCA supply rail is configured as 1.2V~5.5V.The VCCB supply rail is configured from 1.2V~5.5V.Mounting this electronic component is done using the Surface Mount method.Channels are set to 2.Level translators uses the logic IC BUS TRANSCEIVER.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z.Level translators consumes 8μA of quiescent current wLevel translatorshout being affected by outside factors.
74LVCH2T45GF,115 Features
8-XFDFN package
1 circuits
8 pin count
74LVCH series
8 pins
74LVCH2T45GF,115 Applications
There are a lot of Nexperia USA Inc. 74LVCH2T45GF,115 voltage translators & level shifters applications.
- Wearable Health and Fitness Devices
- I2C / SMBus
- Personal Electronics
- Eliminate Slow or Noisy Input Signals
- Extended Product Life Cycle
- One Assembly and Test Site
- One Fabrication Site
- Printers and Other Peripherals
- Extended Product-Change Notification
- Extended Product-Change Notification