74LVCH2T45GM,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFQFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVCH2T45 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 5.1 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.2V~5.5V |
| Height Seated (Max) | 0.5mm |
| RoHS Status | ROHS3 Compliant |
74LVCH2T45GM,125 Overview
Package 8-XFQFN Exposed Pad includes it.Packaged in the way of Tape & Reel (TR).Level translators uses Tri-State, Non-Inverted as level translatorss output configuration.Its translator type is Voltage Level.Surface Mount is used to mount this electronic part.The Channel type of this electrical device is Bidirectional.During operation, the temperature is set to -40°C~125°C TA.To achieve its exceptional flexibility, it relies on 1 circuits.As part of the transmission line termination process, there are a total of 8 terminations.There is a base part number 74LVCH2T45 that refers to the related parts.Level translators is powered by a 1.5V supply.With 8 pins, it is equipped with a minimal number of connections.This device belongs to the 74LVCH series.Level translators is designed wLevel translatorsh 8 pins.An electronic part with 2 bits is designed.There is a maximum voltage of 5.5V supported.1.2V is its minimum supply voltage.VCCA is configured with a supply rail that starts at 1.2V~5.5V.From 1.2V~5.5V, the supply rail of the VCCB is configured.This mount is done using the method of Surface Mount.Level translators is 2 channels.There is a logic IC BUS TRANSCEIVER used in the system.2 terminations are possible, which each match the transmission line's characteristic impedance.Despite the fact that it is an electronic device, it belongs to the LVC/LCX/Z family.Without external influence, it consumes 8μA of quiescent current.
74LVCH2T45GM,125 Features
8-XFQFN Exposed Pad package
1 circuits
8 pin count
74LVCH series
8 pins
74LVCH2T45GM,125 Applications
There are a lot of Nexperia USA Inc. 74LVCH2T45GM,125 voltage translators & level shifters applications.
- One Fabrication Site
- MDIO
- Temperature Ranges (1)
- One Assembly and Test Site
- Eliminate Slow or Noisy Input Signals
- Controlled Baseline
- General purpose I/O level shifting
- GPIO
- Servers
- Routers (routing equipment)
