74LVCH2T45GN,115
| Parameters | |
|---|---|
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.2V~5.5V |
| Height Seated (Max) | 0.35mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVCH2T45 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 5.1 ns |
| Quiescent Current | 8μA |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
74LVCH2T45GN,115 Overview
The 8-XFDFN package contains it.Packaged in the way of Tape & Reel (TR).This output is configured with Tri-State, Non-Inverted.There is a translator type of Voltage Level for this electrical device.Surface Mount is used to mount this electronic part.This electrical device has channel type Bidirectional.A temperature of -40°C~125°C TA is used for operation.In order to achieve its superior flexibility, 1 circuits are used.Ending a transmission line involves 8 terminations.There is a base part number 74LVCH2T45 that refers to the related parts.Level translators is powered by a 1.5V supply.Level translators has 8 pins.There are a number of devices in the 74LVCH series.The pin configuration of the device is 8.2 Bits are used in the design of this electronic part.Supports a voltage of 5.5V as its maximum supply voltage.There is a minimum supply voltage of 1.2V for it.From 1.2V~5.5V, the supply rail of the VCCA is configured.There is a configuration of 1.2V~5.5V for the VCCB supply rail.Mounting this electronic component is done using the Surface Mount method.There are 2 channels.Logic ICs it uses are of the BUS TRANSCEIVER type.2 terminations are the practice of terminating a transmission line with a device matching its characteristic impedance.Level translators is a member of the LVC/LCX/Z family of electronic devices.Level translators consumes 8μA of quiescent current wLevel translatorshout being affected by outside factors.
74LVCH2T45GN,115 Features
8-XFDFN package
1 circuits
8 pin count
74LVCH series
8 pins
74LVCH2T45GN,115 Applications
There are a lot of Nexperia USA Inc. 74LVCH2T45GN,115 voltage translators & level shifters applications.
- Telematics
- Handset
- Personal computing
- Extended Product-Change Notification
- Personal computers
- Servers
- Extended Product Life Cycle
- Available in Military (–55°C/125°C) Temperature Range
- General purpose I/O level shifting
- Enterprise and communications
