74LVCH2T45GT,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVCH2T45 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 5.1 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.2V~5.5V |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LVCH2T45GT,115 Overview
Level translators is integrated into the 8-XFDFN package.A package of Tape & Reel (TR) has been used.Level translators uses Tri-State, Non-Inverted as level translatorss output configuration.Translator type Voltage Level is assigned to this electrical device.Electronic parts are mounted using the Surface Mount method.There is Bidirectional channel type for this electrical device.A temperature of -40°C~125°C TA is used for operation.In order to achieve its superior flexibility, 1 circuits are used.Usually, when a transmission line is terminated, there are 8 termination points used.Based on this base part number 74LVCH2T45, its related parts can be identified.A supply voltage of 1.5V is used to power the device.The device has a pin count of 8.There is one device in the 74LVCH series, and it belongs to that series.8 pins are used in its design.Electronic parts with 2 bits are designed for this application.5.5V is the maximum supply voltage it can handle.There is a minimum supply voltage of 1.2V for it.In the VCCA, the supply rail is set to 1.2V~5.5V.1.2V~5.5V is the configuration of the VCCB supply rail.Level translators has been mounted wLevel translatorsh the method of Surface Mount.The number of channels is growing strong/weak: 2.A BUS TRANSCEIVER logic IC is used.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.Despite the fact that it is an electronic device, it belongs to the LVC/LCX/Z family.Level translators consumes 8μA of quiescent current wLevel translatorshout being affected by external factors.
74LVCH2T45GT,115 Features
8-XFDFN package
1 circuits
8 pin count
74LVCH series
8 pins
74LVCH2T45GT,115 Applications
There are a lot of Nexperia USA Inc. 74LVCH2T45GT,115 voltage translators & level shifters applications.
- Monitors
- Enterprise and communications
- Handset
- Public Signage
- Servers
- Motor Drives
- Extended Product Life Cycle
- Extended Product-Change Notification
- Personal Electronics
- Available in Military (-55°C to 125°C)
