74LVCH32374AEC,518
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 96 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | 74LVCH32374 |
| JESD-30 Code | R-PBGA-B96 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 300MHz |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.4ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Max Frequency@Nom-Sup | 120000000Hz |
| Height Seated (Max) | 1.5mm |
| Length | 13.5mm |
| Width | 5.5mm |
| RoHS Status | ROHS3 Compliant |
74LVCH32374AEC,518 Overview
The item is packaged in 96-LFBGAcases. A package named Tape & Reel (TR)includes it. T flip flop uses Tri-State, Non-Invertedas the output. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 1.65V~3.6V. In the operating environment, the temperature is -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74LVCH series. You should not exceed 300MHzin its output frequency. A total of 4 elements are present. There is 40μA quiescent consumption. A total of 96 terminations have been made. D latch belongs to the 74LVCH32374 family. A voltage of 3.3V is used as the power supply for this D latch. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family LVC/LCX/Zcan be found here. This RS flip flops is a part number FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 3.6V. The supply voltage (Vsup) should be kept above 1.2V for normal operation. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The system runs on a power supply of 3.3V watts. The D flip flop is embedded with 2ports.
74LVCH32374AEC,518 Features
Tape & Reel (TR) package
74LVCH series
3.3V power supplies
74LVCH32374AEC,518 Applications
There are a lot of NXP USA Inc. 74LVCH32374AEC,518 Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Frequency Divider circuits
- Single Up Count-Control Line
- Registers
- ATE
- Synchronous counter
- Data transfer
- Consumer
- Circuit Design
- Bus hold
