74LVCH8T245PW-Q10J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVCH |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVCH8T245 |
| Pin Count | 24 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Nominal Supply Current | 15μA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Quiescent Current | 30μA |
| Family | LVC/LCX/Z |
| Logic Function | Inverting, Transceiver |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | 3mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 3mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.2V~5.5V |
| Channels per Circuit | 8 |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74LVCH8T245PW-Q10J Overview
Package 24-TSSOP (0.173, 4.40mm Width) includes it.This package has the format of Tape & Reel (TR).In its configuration, Tri-State, Non-Inverted is used as the output.There is Voltage Level translator type for this electrical device.Electronic parts are mounted using the Surface Mount method.Bidirectional is the type of channel for this electrical device.The temperature used for operation is -40°C~125°C TA.The superior flexibility of the system is achieved through its use of 1 circuits.As part of the transmission line termination process, there are a total of 24 terminations.Level translators is possible to determine Level translatorss related parts using the base part number 74LVCH8T245.A supply voltage of 1.5V is used to power the device.There are 24 pins on this device.This device belongs to the Automotive, AEC-Q100, 74LVCH series.24 pins are used in its design.Electronic parts are designed with a number of bits of 8.The supply voltage is limited to 5.5V.The minimal supply voltage is 1.2V.From 1.2V~5.5V, the supply rail of the VCCA is configured.1.2V~5.5V is the configuration of the VCCB supply rail.This mount is done using the method of Surface Mount.There is a logic IC BUS TRANSCEIVER used in the system.The 2 terminations involve matching the characteristic impedance of a transmission line to the device that ends the line.In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z.Aquiescent current is consumed by 30μA without being affected by external forces.
74LVCH8T245PW-Q10J Features
24-TSSOP (0.173, 4.40mm Width) package
1 circuits
24 pin count
Automotive, AEC-Q100, 74LVCH series
24 pins
74LVCH8T245PW-Q10J Applications
There are a lot of Nexperia USA Inc. 74LVCH8T245PW-Q10J voltage translators & level shifters applications.
- Automotive infotainment
- Power-sensitive applications
- Infotainment Head Unit
- Personal computing
- Routers (Telecom Switching Equipment)
- Tablet
- Industrial
- Debouncing a mechanical switch
- One Fabrication Site
- Products With Many I
