74LVCV2G66DP,125
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 10Ohm |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVCV2G66 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 100nA |
| Power Dissipation | 250mW |
| Max Supply Current | 40μA |
| Throw Configuration | SPST |
| Adjustable Threshold | NO |
| Turn On Delay Time | 4.7 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Turn-Off Delay Time | 7.9 ns |
| -3db Bandwidth | 210MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 10μA |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5ns, 9ns |
| Charge Injection | 0.0035pC |
| Crosstalk | -55dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Voltage - Supply, Single (V+) | 2.3V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74LVCV2G66DP,125 Overview
Due to its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around -40°C~125°C TA are extended for operation. In total, there are 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. A total of 8 pins are injected into the electrical part body. Circuits based on SPST - NO switching are used to construct these analog switch ics. Use 74LVCV2G66 to search for variants of the digital switches. This digital multiplexer has 10Ohm internal resistance. You can find the functions of the 8 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. There should be 2.3V voltage fed to the electrical part below 2.3V. This multiplexer would work with 40μA current. Draining from a single voltage supply, this analog switch requires a voltage of 2.3V~5.5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 40μA. A POWER SUPPLY SUPPORT CIRCUIT analog IC is integrated into the board. There is a voltage range of 5V operating voltages for the electrical part. In order to operate the 2 inputs, there are several steps to follow.
74LVCV2G66DP,125 Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 210MHz
74LVCV2G66DP,125 Applications
There are a lot of Nexperia USA Inc. 74LVCV2G66DP,125 Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- E1 Network Equipment
- ISDN NT1/TA
- Communication systems
- High reliability control systems
- 65 V DACs
- Audio and video switching
- Automatic test equipment
- Cable PC
- SDH/SONET multiplexers
