74LVCV2G66GD,125
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 10Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVCV2G66 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 100nA |
| Max Supply Current | 40μA |
| Throw Configuration | SPST |
| Adjustable Threshold | NO |
| Turn On Delay Time | 4.7 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 7.9 ns |
| -3db Bandwidth | 210MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 10μA |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5ns, 9ns |
| Charge Injection | 0.0035pC |
| Crosstalk | -55dB @ 1MHz |
| Switch-on Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2.3V~5.5V |
| Height Seated (Max) | 0.5mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVCV2G66GD,125 Overview
Packed in 8-XFDFN, the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -40°C~125°C TA. In total, 8 terminations have occurred. The electronic part delivers high-quality output through its 1 channels. A 3.3V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 8 series. Based on SPST - NO switching circuits, these analog multiplexers work. Circuits number 2 make up this analogue multiplexer. Use 74LVCV2G66 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 10Ohm. You can find the functions of the 8 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Single supply type. There should be 2.3V voltage fed to the electrical part below 2.3V. The switch device would be able to operate with 40μA current. Analogue multiplexers require a 2.3V~5.5V voltage to drain from a single voltage supply. If you put voltage higher than 40μA on the digital multiplexer, damage may occur. It is integrated with POWER SUPPLY SUPPORT CIRCUIT analog ICs. Operating voltages of 5V are compatible with the electrical part.
74LVCV2G66GD,125 Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 210MHz
74LVCV2G66GD,125 Applications
There are a lot of Nexperia USA Inc. 74LVCV2G66GD,125 Analog Switches & Multiplexers ICs applications.
- DSUs
- High speed data transmission line cards
- SONET
- Fault Tolerant Systems
- Battery Powered Systems
- Precision instrumentation
- Microwave transmission systems
- Cable PC
- ISDN NT1/TA
- Residential Gateways, Home Gateway/Router
