74LVQ4066TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVQ |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bilateral, FET Switches |
| Resistance | 23Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVQ4066 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 1 |
| Max Supply Current | 2μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 4 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 7.5 ns |
| Off-state Isolation-Nom | 60 dB |
| Voltage Supply Source | Single Supply |
| On-state Resistance Match-Nom | 2Ohm |
| Switching | MAKE-BEFORE-BREAK |
| Normal Position | NO |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVQ4066TTR Overview
As a means of saving space, digital switch is provided in the 14-TSSOP (0.173, 4.40mm Width).It is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The analog IC used in the multiplexers can be referred to as Bilateral, FET Switches.The operating temperature of -55°C~125°C will not be susceptible to external factors.When digital controlled switch operates at 2V~5.5V, designers are provided with a greater degree of flexibility.Multiplexers in the 74LVQ series are suitable for a wide range of applications.Among its basic configurations are 14 terminations.The base part number is 74LVQ4066, which can also be used to find its logic switch related parts.For multiplexer's system, 3.3V voltage is supplied.In this turn signal switch, there are 14 components that can be connected to each pin.It employs GULL WING as the point at which conductors come to an end.There is a supply type of Single employed as part of this supply.It is configured with 14 pins.The mounting point is Surface Mount.Keep Vsup at 2V to avoid unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.mux switch's normal operation requires the power supply of 3.3V.The digital switch ic is an electronic part classified into Multiplexer or Switches.In this multiplexer, there is a total of 4 inputs.A resistance of 23Ohm is used to operate it.This turn signal switch's circuit is based on a circuit with 1 channels.
74LVQ4066TTR Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
74LVQ4066TTR Applications
There are a lot of STMicroelectronics 74LVQ4066TTR Signal Switches / Multiplexers / Decoders applications.
- Injectors
- Enabling different rows of memory depending on address in memory chips
- VGA
- Transmission from the computer system of a satellite
- Robotic vehicles
- High-performance memory systems
- Data transfer
- Logic gates for other digital devices
- To select different devices in microprocessor input
- Microprocessor instruction decoding
