74LVT125D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SO |
| Number of Pins | 14 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | INPUTS CAN BE DRIVEN BY 3.3V OR 5V COMPONENTS |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 14 |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 7mA |
| Family | LVT |
| Logic Function | Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Control Type | ENABLE LOW |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 85°C |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVT125D Overview
Logical driver uses a neat SO package. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. Transceiver shares the LVT family's comprehensive benefits and features. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 7mA. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. 1 bits are included within the electrical component. Logical driver features INPUTS CAN BE DRIVEN BY 3.3V OR 5V COMPONENTS to better serve the need. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 64mA to its low level. In high level output mode, the electronic parts may conduct -32mA of current. Voltage used to run voltage buffer should be 2.7V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. It is known as a BUS DRIVER logic IC. The fundamental operation of logical driver is based on 4 circuits.
74LVT125D Features
Bus Driver/Transceivers
INPUTS CAN BE DRIVEN BY 3.3V OR 5V COMPONENTS
High Level Output: 64mA
Low Level Output: -32mA
BUS DRIVER Logic IC
74LVT125D Applications
There are a lot of NXP Semiconductors / Freescale 74LVT125D Buffers & Transceivers applications.
- Wireless smart house
- Precision engineering measurement
- Televisions
- Telecom and datacom networking applications
- interconnection between computers
- Satellite ground stations
- Wireless HD Photography
- Desktop PC
- interconnection between switches
- Laser diode bonding
