74LVT162373DGG,518
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVT162373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Number of Output Lines | 16 |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74LVT162373DGG,518 Overview
In the package 48-TFSOP (0.240, 6.10mm Width), it can be found. It is packaged in the way of Tape & Reel (TR). Tri-State is the output configured for it. A D-Type Transparent Latch logic type is used in this electrical device. Electronic components are mounted using the Surface Mount method. The voltage supply is 2.7V~3.6V. It operates at -40°C~85°C degrees Celsius. 74LVT is the series number of this FPGA. 16 Bits are used in the design of this electronic part. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This type belongs to the 74LVT162373 family. The supply voltage of the device is 3.3V. 48 pins are available on it. LVT is the family name of this electronic device. The device has 48 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. It is possible to reach 3.6V when the maximum supply voltage (Vsup) has been reached. Optimal efficiency requires 3.3V as the supply voltage. There are 16 output lines that correspond to the binary equivalents of the input line. A total of 2 elements make up this object.
74LVT162373DGG,518 Features
48-TFSOP (0.240, 6.10mm Width) package
74LVT series
16 Bits
74LVT162373 family
48 pin count
48 pins
2 elements
74LVT162373DGG,518 Applications
There are a lot of Nexperia USA Inc. 74LVT162373DGG,518 Latches applications.
- Hammer
- Control circuits
- OC-48 communication systems
- Bus system register with enable parallel lines at bus side
- Up-Down Johnson
- Storage
- Lamp and Display (LED)
- Hammer Device Information
- Serial Input
- General-Purpose Register
