74LVT16374ADGG,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVT16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6 ns |
| Quiescent Current | 4mA |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Current - Quiescent (Iq) | 120μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Clock Edge Trigger Type | Positive Edge |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LVT16374ADGG,112 Overview
The flip flop is packaged in 48-TFSOP (0.240, 6.10mm Width). A package named Tubeincludes it. T flip flop uses Tri-State, Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2.7V~3.6Vis required for its operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74LVTseries FPGA. You should not exceed 150MHzin the output frequency of the device. In total, there are 2 elements. It consumes 120μA of quiescent 48terminations have occurred. It is a member of the 74LVT16374 family. The power source is powered by 3.3V. Its input capacitance is 3pF farads. LVTis the family of this D flip flop. A part of the electronic system is mounted in the way of Surface Mount. With its 48pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. An electronic part with 16bits has been designed. Vsup reaches its maximum value at 3.6V. The D flip flop is embedded with 2ports. The supply voltage should be maintained at 3.3V for high efficiency. In terms of quiescent current, it consumes 4mA .
74LVT16374ADGG,112 Features
Tube package
74LVT series
48 pins
16 Bits
74LVT16374ADGG,112 Applications
There are a lot of Nexperia USA Inc. 74LVT16374ADGG,112 Flip Flops applications.
- Data transfer
- Data storage
- Reduced system switching noise
- Buffered Clock
- Computing
- Convert a momentary switch to a toggle switch
- Matched Rise and Fall
- Communications
- Divide a clock signal by 2 or 4
- Buffer registers
