74LVT16374ADGG,518
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Type | D-Type |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVT16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 120μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 6mA |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74LVT16374ADGG,518 Overview
The flip flop is packaged in a case of 48-TFSOP (0.240, 6.10mm Width). D flip flop is embedded in the Tape & Reel (TR) package. There is a Tri-State, Non-Invertedoutput configured with it. JK flip flop uses Positive Edgeas the trigger. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at 2.7V~3.6Vvolts. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74LVTseries contain this type of chip. There should be no greater frequency than 150MHzon its output. The element count is 2 . T flip flop consumes 120μA quiescent energy. A total of 48 terminations have been made. If you search by 74LVT16374, you will find similar parts. Power is provided by a 3.3V supply. JK flip flop input capacitance is 3pF farads. A device of this type belongs to the family of LVT. Surface Mount mounts this electronic component. It is designed with 48 pins. This device's clock edge trigger type is Positive Edge. It is designed with a number of bits of 16. There is a 3.6Vmaximum supply voltage (Vsup). This D flip flop is well suited for TAPE AND REEL based on its reliable performance. The D flip flop has no ports embedded. If high efficiency is desired, the supply voltage should be kept at 3.3V. It has 8 output lines to operate.
74LVT16374ADGG,518 Features
Tape & Reel (TR) package
74LVT series
48 pins
16 Bits
74LVT16374ADGG,518 Applications
There are a lot of Nexperia USA Inc. 74LVT16374ADGG,518 Flip Flops applications.
- Set-reset capability
- Cold spare funcion
- Bounce elimination switch
- Control circuits
- Differential Individual
- Buffer registers
- Data transfer
- Count Modes
- Computers
- Shift registers
