74LVT374WM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 4.8 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max Propagation Delay @ V, Max CL | 4.9ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVT374WM Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). Package Tubeembeds it. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. A 2.7V~3.6Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74LVT series. There should be no greater frequency than 160MHzon its output. A total of 1 elements are present. As a result, it consumes 190μA of quiescent current without being affected by external factors. The number of terminations is 20. JK flip flop belongs to 74LVT374 family. A voltage of 3.3V is used to power it. Input capacitance of this device is 3pF farads. Devices in the LVTfamily are electronic devices. Surface Mount mounts this electronic component. The 20pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. An electronic part designed with 8bits is used in this application. There is a 3.6Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 2.7V for normal operation. Its flexibility is enhanced by 8 circuits. The flip flop has 2ports embedded within it. For high efficiency, the supply voltage should be set to 3.3V.
74LVT374WM Features
Tube package
74LVT series
20 pins
8 Bits
74LVT374WM Applications
There are a lot of ON Semiconductor 74LVT374WM Flip Flops applications.
- Clock pulse
- Digital electronics systems
- Balanced Propagation Delays
- Event Detectors
- Single Up Count-Control Line
- Individual Asynchronous Resets
- Divide a clock signal by 2 or 4
- Latch
- Communications
- Data transfer
