74LVT374WMX
| Parameters | |
|---|---|
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 4.8 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max Propagation Delay @ V, Max CL | 4.9ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
74LVT374WMX Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). The Tape & Reel (TR)package contains it. This output is configured with Tri-State, Non-Inverted. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2.7V~3.6V. Temperature is set to -40°C~85°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74LVT series. In order for it to function properly, its output frequency should not exceed 160MHz. In total, it contains 1 elements. It consumes 190μA of quiescent 20terminations have occurred. JK flip flop belongs to 74LVT374 family. It is powered from a supply voltage of 3.3V. This T flip flop has a capacitance of 3pF farads at the input. The electronic device belongs to the LVTfamily. It is mounted in the way of Surface Mount. A total of 20pins are provided on this board. It has a clock edge trigger type of Positive Edge. The design is based on 8bits. In this case, the maximum supply voltage (Vsup) reaches 3.6V. Normal operation requires a supply voltage (Vsup) above 2.7V. 8 circuits are used to achieve its superior flexibility. The flip flop has 2ports embedded within it. If high efficiency is desired, the supply voltage should be kept at 3.3V.
74LVT374WMX Features
Tape & Reel (TR) package
74LVT series
20 pins
8 Bits
74LVT374WMX Applications
There are a lot of ON Semiconductor 74LVT374WMX Flip Flops applications.
- Computers
- Reduced system switching noise
- Power down protection
- Digital electronics systems
- Computing
- Bus hold
- Individual Asynchronous Resets
- EMI reduction circuitry
- Automotive
- Guaranteed simultaneous switching noise level
