74LVT534PW,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVT534 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | LVT |
| Current - Quiescent (Iq) | 190μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.9ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.9 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 5.4 ns |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74LVT534PW,118 Overview
The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Tri-State, Inverted. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2.7V~3.6V volts. It is operating at a temperature of -40°C~85°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74LVT series. You should not exceed 150MHzin its output frequency. A total of 1elements are contained within it. There is a consumption of 190μAof quiescent energy. There are 20 terminations,The object belongs to the 74LVT534 family. Power is supplied from a voltage of 3.3V volts. The input capacitance of this JK flip flopis 4pF farads. The electronic device belongs to the LVTfamily. There is a FF/Latchesbase part number assigned to the RS flip flops. Vsup reaches 3.6V, the maximal supply voltage. The supply voltage (Vsup) should be maintained above 2.7V for normal operation. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. It runs on 3.3Vvolts of power. A total of 2ports are embedded in the D flip flop.
74LVT534PW,118 Features
Tape & Reel (TR) package
74LVT series
3.3V power supplies
74LVT534PW,118 Applications
There are a lot of NXP USA Inc. 74LVT534PW,118 Flip Flops applications.
- Buffered Clock
- Divide a clock signal by 2 or 4
- Data storage
- Test & Measurement
- Patented noise
- Storage Registers
- Control circuits
- Buffer registers
- Frequency division
- ESCC
